How To Clean Your Iron With Salt?

13 (2)

Have you ever wondered why our clothes don’t look snazzy even after being ironed? You can only get the desired ironing if the iron’s bottom area is cleaned. However, this article will discuss how to clean the bottom of an iron with simple ingredients (available in every kitchen). 

We all use irons in our homes and other liveable places to remove creases and wrinkles from our clothes. Due to their oily, sticky, and dusty soleplates (the bottom of an iron) leaves our clothes messy. It is very important to maintain and cleaning bottom of iron.

Many ways can help to clean and maintain irons. Additionally, you can use a store-bought cleaning solution for tough stains. However, you must ensure the iron is unplugged when cleaning it.

Often, fabrics can melt, resulting in an ugly and stubborn mess. Maintaining your iron will allow it to glide easily over shirts, dresses, slacks, and much more. Keeping your iron clean is important, as dirt or other build-ups can lead to fabric damage. 

But how to clean your iron? In this guide, you’ll learn to cleaning irons with salt. 

Step By Step Guide On How To Clean Bottom Of Iron With Salt

It is important to clean the iron while measuring the ingredients properly. Once the iron is clean, do not rinse it but wipe it with a dampened cloth. Here is a step-by-step guide to cleaning your iron with salt!

  • Make sure the iron is unplugged. 

If you clean your iron with salt, ensure it’s completely off and unplugged first. If it is plugged in, the salt can cause the iron to short-circuit and potentially damage the wiring. It is also possible that the salt could cause the iron to overheat, which can be a serious safety risk.

  • Add salt to the water and mix well.

Make a paste by mixing salt and water in a small bowl. Salt is a natural antiseptic and disinfectant that helps kill germs and bacteria. When you add salt to the water and mix it, it helps break down the dirt and oils when cleaning the bottom of an iron to make it easier to clean.

  • The process of application. 

To apply the salt paste, use a soft cloth or sponge. Cover all areas that are stained or dirty. The salt paste helps absorb the dirt and grease from the surface, so it is important to cover all areas that need to be cleaned. Let the paste sit briefly before wiping it off with a damp cloth.

  • Turn the heat on to the iron.

Heat your iron for a few minutes at its highest temperature. As a result, dirt and stains will be loosened by the salt paste. The heat helps to activate the salt and create a paste that is effective at breaking up dirt and stains on the surface of the iron. The salt also helps draw out any moisture from the dirt and stains, making removing it easier.

  • Start scrubbing the soleplate gently. 

Scrub the soleplate in circular motions using a clean cloth or sponge. Ensure enough pressure is applied to remove all dirt and stains. This is because the circular motion helps to agitate the dirt and stains, loosening them from the soleplate, while the pressure helps to break them down and lift them away from the surface.

  • Wipe the soleplate.

Remove any remaining salt paste and dirt from the soleplate by wiping it with a clean, damp cloth after scrubbing. This will ensure that no particles can scratch the surface of your clothing when you use the iron. Additionally, it will help maintain the efficiency of the iron by preventing it from clogging up with debris.

  • Repeat the process if necessary.

After you’ve cleaned your iron a few times, you can repeat the process if it’s still dirty or has mineral buildup. This is because mineral buildup can be difficult to remove and require multiple cleanings. Additionally, repeated cleaning can help ensure the iron is completely clean and won’t leave any residue on your clothes.

  • Clean the steam vents.

People often forget to clean the steam vents when they are searching for how to clean bottom of iron. Using a cotton swab, gently clean steam vents with vinegar and water. Steam vents can become blocked over time with lint and other debris. Cleaning the steam vents regularly with a vinegar and water mixture will ensure that the vents are not blocked and that the steam can flow freely.

  • Clean the soleplate by rinsing it. 

The soleplate should be rinsed with clean water and dried with a soft cloth. This will help to remove any dirt or debris that might have accumulated on the soleplate. It will also help to prevent corrosion and prolong the life of the soleplate.

What Are Other Ways To Clean Bottom Of Iron?

Cleaning irons with salt is one of the easiest and fastest ways to get your iron cleaned and fresh as new. However, there are still many options available that can help to cleaning bottom of iron without burdening your wallet. 

  • Using Baking Soda: All you need is a spoonful of baking soda (easily available in the kitchen cabinets). Mix it with a few drops of water to make a smooth paste. Use a dry cloth, take a heavy dose of paste, and apply it on the bottom of the iron. Scrub it briefly and wipe it off with a clean wet cloth.
  • Clean Your Iron With Toothpaste: It is a very easy and handy activity cleaning the bottom of an iron. Put a great amount of toothpaste on the bottom area of the iron, scrub it circularly with a clean cloth, and wipe it off completely. 
  • Wipe Scratches With Vinegar: Yes! Vinegar helps clean solid wood to steel or metal objects easily in many ways. If your iron’s soleplate is becoming dusty or rusty, mix 2 spoons of vinegar with the same quantity of plain water and wipe the whole area completely.
  • Use Dryer Sheets: The soleplates should be rubbed with dryer sheets while the iron is on low heat. If the gunk does not come off, continue rubbing.


In conclusion! always make sure not to use any sharp or hard cleaning objects when cleaning the bottom of an iron, as they can create more scratches or permanent damage to the iron’s soleplate. Instead, use a soft cloth to rub the dirt away gently. This will help prevent further damage to the soleplate and keep your iron looking new.

Whatsapp call